Cable Trunking and Fittings

Vertical outside riser cable trunking, with a butterfly (BF), manufactured from pre galvanized steel (GI),...

Horizontal cable trunk bend 90 deg with a self screw (SC), manufactured from HDG steel. 1.5mm thickness, 60...

Cable trunk cross (W/P), with an C-Type outside, manufactured from HDG steel. 2.0mm thickness,100mm height,...

Cable trunk tee (W/P), with an C-Type inside, manufactured from HDG steel. 2.0mm thickness,100mm height, 90...

Vertical internal riser cable trunk, with a self screw (SC), 2.0mm thick, 60mm side, 600mm width. manufactu...

Cable trunk tee with a snap-on in (SPI), manufactured from powder-coated steel. 1.5mm thick, 75mm height, 1...

Cable trunk straight reducer, with a self screw (SC), manufactured from HDG steel. 2.0mm thick,100mm side,...

Aluminum horizontal cable trunk elbow 90 degree with a self screw (SC), 2.0mm thickness, 60mm height, 900mm...

Cable trunk straight reducer, with a snap-on in (SPI), manufactured from powder-coated steel (PC). 2.0mm th...

Cable trunk cross connection with a snap-on in (SPI), 1.5mm thickness, 100mm height, 100mm width,  provides...

Straight aluminum trunking reducer, with a snap-on in (SPI), 1.5mm thickness, 75mm side, 300mm width. Manuf...

Weatherproof (W/P) cable trunk internal riser, with an outside bend, 2.0mm thick, 100mm height, 750mm width...

Cable trunk cross with a butterfly (BF), manufactured from powder-coated steel (PC). 2.0mm thick, 75mm heig...

Aluminum horizontal cable trunk elbow 90 degree with an insert nut (IN), 2.0mm thickness, 75mm height, 600m...

Cable trunk tee with a butterfly (BF), manufactured from HDG steel. 2.0mm thick, 60mm side, 600mm width. pr...

Cable trunk tee connection with an insert nut (IN), 1.5mm thickness, 60mm height, 150mm width, produced by...

Cable trunk cross with a butterfly (BF), produced by BAHRA company. manufactured from HDG steel. 1.5mm thic...

Vertical outside riser cable trunking, with a butterfly (BF), manufactured from pre galvanized steel (GI),...

Weatherproof (W/P) cable trunk cross, with an outside bend, manufactured from powder-coated steel (PC). 2.0...

Solid bottom cable tray (Cable Trunk) straight with an insert nut (IN), manufactured from HDG steel. 1.5mm...