Cable Trunking and Fittings

Cable trunk tee with a self screw (SC), manufactured from HDG steel. 2.0mm thickness, 100mm height, 900mm w...

Aluminum horizontal cable trunk elbow 90 degree with an insert nut (IN), 1.5mm thickness, 100mm height, 100...

Vertical internal riser cable trunking, with a butterfly (BF), produced by BAHRA company. manufactured from...

Aluminum cable trunk tee (W/P), outside bend, 1.5mm thickness, 75mm side, 300mm width. Produced by BAHRA co...

Weatherproof (W/P) cable trunk cross, with an inside bend, manufactured from powder-coated steel (PC). 1.5m...

Weatherproof (W/P) cable trunk straight, with an inside bend, manufactured from powder-coated steel (PC). 1...

Horizontal cable trunk elbow 90 degree with a self screw (SC), manufactured from pre galvanized steel (GI),...

Cable trunk tee with an insert nut (IN), manufactured from powder-coated steel. 1.5mm thick, 60mm height, 3...

Cable trunk tee with an insert nut (IN), manufactured from powder-coated steel. 2.0mm thick, 60mm height, 6...

Vertical internal riser cable trunk, with a self screw (SC), manufactured from pre galvanized steel (GI), 1...

Cable trunk cross connection (W/P), with an C-Type outside,1.5mm thickness, 60mm height, 300mm width. manuf...

Cable trunk cross connection (W/P), with an C-Type outside, manufactured from HDG steel.1.5mm thick,100mm h...

Aluminum cable trunk bend 90 degrees, horizontal with a snap-on in (SPI), 2.0mm thickness, 60mm sides, 750m...

Straight aluminum trunk reducer, with an insert nut (IN), 1.5mm thick, 75mm height, 150mm width. Produced b...

Horizontal cable trunk bend 90 deg with an insert nut (IN), manufactured from HDG steel. 1.5mm thickness, 1...

Horizontal cable trunk elbow 90 degree with an insert nut (IN), 2.0mm thick, 100mm height, 450mm width, use...

Weatherproof cable trunk straight, with an inside bend, manufactured from HDG steel. 2.0mm thick,100mm side...

Aluminum cable trunk (solid bottom), 2.0mm thick, 75mm height, 450mm width. Equipped with a butterfly (BF)...

Cable trunk inside riser (W/P), with an C-Type inside, 2.0mm thickness, 60mm height, 900mm width. manufactu...

Vertical outside riser bend cable trunk,1.5mm thick, 60mm height, 100mm width. with a snap-on in (SPI), man...